# Auto-zero/Auto-calibration

(Difference between revisions)
 Revision as of 16:54, 12 September 2010 (edit) (→Biochemical temperature control)← Previous diff Current revision (11:25, 5 December 2011) (edit) (undo) (31 intermediate revisions not shown.) Line 22: Line 22: *$x\,$ a collection of some environmental or control variables that need to be estimated *$x\,$ a collection of some environmental or control variables that need to be estimated *$x_c\,$ a collection of calibration points *$x_c\,$ a collection of calibration points - *$\bar{x}\,$ the PDF of $x\,$ when subject to probabilistic constraints. + *$\bar{x}\,$ the PDF of $x\,$ . This is a representation of a function. + *$\bar{x}(x_c)\,$ the evaluation of the PDF $\bar{x}\,$ at $x_c$. *$\hat{x}$ be the estimate of $x\,$ *$\hat{x}$ be the estimate of $x\,$ *$p \,$ a collection of parameters that are constant during operations but selected at design time. The system "real" values during operation are typically $p+e \,$; although other modifications are possible. *$p \,$ a collection of parameters that are constant during operations but selected at design time. The system "real" values during operation are typically $p+e \,$; although other modifications are possible. *$e\,$ be errors: assumed to vary, but constant during intervals between calibrations and real measurements *$e\,$ be errors: assumed to vary, but constant during intervals between calibrations and real measurements - *$\bar{e}\,$ the PDF of $e\,$ . + *$\bar{e}\,$ the PDF of $e\,$ . This is a representation of a function. + *$\bar{e}(x)\,$ the evaluation of the PDF $\bar{e}\,$ at x. * $y\,$ be the results of a measurement processes attempting to measure $x\,$ * $y\,$ be the results of a measurement processes attempting to measure $x\,$ ** $y=Y(x;p,e)\,$ where $e\,$ might be additive, multiplicative, or some other form. ** $y=Y(x;p,e)\,$ where $e\,$ might be additive, multiplicative, or some other form. Line 40: Line 42: Then the problem can be formulated as: Then the problem can be formulated as: *Given $x_c,y_c\,$ *Given $x_c,y_c\,$ - *Find a formula or process $\hat{X}\,$ to select $\left(x_c,y_c\right)\xrightarrow{\hat{X}}\hat{x} \,$ so as to minimize $Q(x,\hat{x})$ + *Find a formula or process $\hat{X}\,$ to select $\hat{X}\left(x_c,y_c\right)\rightarrow\hat{x} \,$ so as to minimize $Q(x,\hat{x})$ ** The reason for the process term $\hat{X} \,$ is that many correction schemes are feedback controlled; $\hat{X} \,$ is never computed, internally, although it might be necessary in design or analysis. ** The reason for the process term $\hat{X} \,$ is that many correction schemes are feedback controlled; $\hat{X} \,$ is never computed, internally, although it might be necessary in design or analysis. + + === Algebra of Distributions of Random Variables === + This section discusses algebraic combinations of variables realized from distributions. + * $\mathcal{F}(g(x))\,$ is the Fourier transform of $g(x)$. + * $\mathcal{M}(g(x))\,$ is the Mellin transform of $g(x)$. + * $\oplus\,$:Let + ** $c=a+b,\ a,b,c\in \mathbb{R}\,$, + ** $\overline{c},\overline{a},\overline{b}\,$ the PDF's of $a,b,c \,$. + ** $\overline{c} = \overline{a}\oplus \overline{b}=\mathcal{F}^{-1}( \mathcal{F}(\overline{a})\cdot \mathcal{F}\left(\overline{b} \right))\,$ + * $\ominus \,$:Let + ** $c=a-b=a+(-b),\ a,b,c\in \mathbb{R} \,$, + ** $\overline{c},\overline{a},\overline{b}(-x)\,$ the PDF's of $a,-b,c\,$. + ** $\overline{c} = \overline{a}\ominus \overline{b}=\mathcal{F}^{-1}( \mathcal{F}(\overline{a})\cdot \mathcal{F}\left(\overline{b}(-x) \right))\,$ + * $\otimes \,$:Let + ** $c=a\cdot b,\ a,b,c\in (0,\infty)\,$ + *** Springer as an extension to $\mathbb{R} \,$ + ** $\overline{c},\overline{a},\overline{b}\,$ the PDF's of $a,b,c\,$. + ** $\overline{c} = \overline{a}\otimes \overline{b}=\mathcal{M}^{-1}( \mathcal{M}(\overline{a})\cdot \mathcal{M}\left( \overline{b} \right))\,$ + * $\oslash$:Let + ** $c= \frac{a}{b},\ a,b,c\in (0,\infty) \,$ + *** Springer as an extension to $\mathbb{R} \,$ + ** $\overline{c},\overline{a},\overline{b}(x)\,$ the PDF's of $a,b,c\,$. + ** $\overline{c} = \overline{a}\oslash \overline{b}=\mathcal{M}^{-1}( \mathcal{M}(\overline{a})\cdot \mathcal{M}\left(\overline{b}(\frac{1}{x}) \right))\,$ + Reference: The algebra of random variables, Springer, M.D., 1979, Wiley, New York == Examples == == Examples == Line 55: Line 81: ** $\overline{e_{ref}}\,$ the PDF of $e_{ref} \,$ ** $\overline{e_{ref}}\,$ the PDF of $e_{ref} \,$ ** $R_b, e_b \,$ the nominal bias resistor and bias resistor error ** $R_b, e_b \,$ the nominal bias resistor and bias resistor error - ** $\overline{e_b}\,$ the PDF of $e_b\,$ + ** $\overline{e_b}\,$ the PDF of $e_b\,$ ** $e_{com} \,$ an unknown constant resistance in series with $R_c, R_t \,$ for all readings ** $e_{com} \,$ an unknown constant resistance in series with $R_c, R_t \,$ for all readings ** $\overline{e_{com}}\,$ the PDF of $e_{com} \,$ ** $\overline{e_{com}}\,$ the PDF of $e_{com} \,$ Line 62: Line 88: * With errors * With errors ** $V_x=v_{off}+\frac{(V_{ref} +e_{ref})(R_x +e_{com})}{(R_x+e_{com} + R_b+e_b)}$ ** $V_x=v_{off}+\frac{(V_{ref} +e_{ref})(R_x +e_{com})}{(R_x+e_{com} + R_b+e_b)}$ + * Implicit formula for PDF distributions. Generally this form two unknown distributions $\overline{V_{t}},\overline{R_{t}}\,$ but in any particular application one or the other is known. In addition the constants, $1, V_{ref}, V_b \,$ in the formula stand for the Dirac delta distribution positioned on the constant. + **$\overline{V_{t}}\ominus\overline{v_{off}}\ominus\left(\left(V_{ref}\oplus\overline{e_{ref}}\right)\oslash\left(1\oplus\left(\left(R_{b}\oplus\overline{e_{b}}\right)\oslash\left(\overline{R_{t}}\oplus\overline{e_{com}}\right)\right)\right)\right)=0\,$ * Calibration reading * Calibration reading ** $V_c=\left.V_x\right|_{x\leftarrow c}$ ** $V_c=\left.V_x\right|_{x\leftarrow c}$ Line 71: Line 99: *** $R_t=\frac{(V_t-v_{off})(e_{com}+R_b+e_b)-e_{com}(V_{ref}+e_{ref})}{V_{ref}-v_{off}-V_t-e_{ref}}$ *** $R_t=\frac{(V_t-v_{off})(e_{com}+R_b+e_b)-e_{com}(V_{ref}+e_{ref})}{V_{ref}-v_{off}-V_t-e_{ref}}$ ** Inversion in terms of estimates ** Inversion in terms of estimates - ***$\widehat{R_t}=\frac{(V_t-\widehat{v_{off}}) (\widehat{e_{com}}+R_b+\widehat{e_b})-\widehat{e_{com}}(V_{ref}+\widehat{e_{ref}})}{V_{ref}-\widehat{v_{off}}-V_{t}-\widehat{e_{ref}}} + ***[itex]\widehat{R_t}=\frac{(V_t-\widehat{v_{off}}) (\widehat{e_{com}}+R_b+\widehat{e_b})-\widehat{e_{com}}(V_{ref}+\widehat{e_{ref}})}{V_{ref}-\widehat{v_{off}}-V_{t}-\widehat{e_{ref}}}$ - [/itex] + - * Representation of Inversion in terms of PDF's. The real calculation requires convolution with respect to: +, -, *, and \ . Furthermore the convolutions can't be done with ''simple'' Fourier and Mellin transforms since terms appear in multiple places. + - **$\overline{R_{t}'}=\frac{(V_t-\overline{v_{off}'}) (\overline{e_{com}'}+R_b+\overline{e_b'})-\overline{e_{com}'}(V_{ref}+\overline{e_{ref}'})}{V_{ref}-\overline{v_{off}'}-V_{t}-\overline{e_{ref}'}} + -$ + ** Mode estimate: Find the maximum value of $\overline{R_{t}'} \,$. A necessary condition for differentiable functions is $\frac{d\overline{R_{t}'}_{|{p'}}}{dp'}=0 \,$ In polynomial cases this can theoretically be solved via Groebner basis; but even given the "exact" solutions, one is forced into sub-optimal/approximate estimates. ** Mode estimate: Find the maximum value of $\overline{R_{t}'} \,$. A necessary condition for differentiable functions is $\frac{d\overline{R_{t}'}_{|{p'}}}{dp'}=0 \,$ In polynomial cases this can theoretically be solved via Groebner basis; but even given the "exact" solutions, one is forced into sub-optimal/approximate estimates. ** Mean estimate: Find the expectation, that is $\widehat{R_t}=\int R'\cdot \overline{R_{t}'}_{|{R'}} dR'$ ** Mean estimate: Find the expectation, that is $\widehat{R_t}=\int R'\cdot \overline{R_{t}'}_{|{R'}} dR'$ Line 84: Line 108: ====Optimization Format==== ====Optimization Format==== - *The setpoint case with a full optimzer available at runtime. The purpose is to choose error space values that minimize some likelihood. The selected error values can then be reused to calculate $\widehat{R_t} \,$ for different values of $V_t \,$. It is presumed that we choose likelihoods such that surfaces of constant likelihood form a series of nested n-1 dimensional convex sets/shells around a center. Note the weighting so that the equal likelihood rectangles are the same shape as the boundaries. In addition the $e_{com-center}$ is mathematically centered. In real situations this variable might not be numerically centered in the allowed range. Given the above assumptions this just leads to more complicated weighting but still a boundary around a convex set. . + *The setpoint case with a full optimzer available at runtime. The purpose is to choose error space values that minimize some likelihood function. The selected error values can then be reused to calculate $\widehat{R_t} \,$ for different values of $V_t \,$. It is presumed that we choose likelihoods such that surfaces of constant likelihood form a series of nested n-1 dimensional convex sets/shells around a center. + * Absolute value case choosing error values for subsequent calculations. + minimize $\frac{|\widehat{v_{off}}|}{L_{off}}\,+\frac{|\widehat{e_{com}}\,-e_{com-center}|}{L_{com}}+\frac{|\widehat{e_{ref}}|}{L_{ref}}\,+\frac{| \widehat{e_b}\,|}{L_b}$ minimize $\frac{|\widehat{v_{off}}|}{L_{off}}\,+\frac{|\widehat{e_{com}}\,-e_{com-center}|}{L_{com}}+\frac{|\widehat{e_{ref}}|}{L_{ref}}\,+\frac{| \widehat{e_b}\,|}{L_b}$ w.r.t. $\widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,$ w.r.t. $\widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,$ - subject to $[|\widehat{v_{off}}|\,,\widehat{e_{com}}\,,-\widehat{e_{com}}\,,|\widehat{e_{ref}}|\,,|\widehat{e_b}|]\,\leq\,[L_{off},L_{com},0,L_{ref}\,,L_{b}]$
+ subject to $[|\widehat{v_{off}}|\,,\widehat{e_{com}}\,,-\widehat{e_{com}}\,,|\widehat{e_{ref}}|\,,|\widehat{e_b}|]\,\leq\,[L_{off},L_{com},0,L_{ref}\,,L_{b}] - [itex]V_c=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(R_c +\widehat{e_{com}})}{(R_c+\widehat{e_{com}} + R_b+\widehat{e_b})}$ + [/itex]
- + $V_c=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(R_c +\widehat{e_{com}})}{(R_c+\widehat{e_{com}} + R_b+\widehat{e_b})} - *Working directly on choosing the most likely (mode) value of [itex]\overline{R_{t}'}$. Temporarily working without boundaries and using a set of independent Gaussian variables. + - maximize $\overline{R_{t}'} +$ [/itex] + + ====Optimization Format 2==== + * Reformulation in extended matrix format. A derivation is in the [[Talk:Auto-zero/Auto-calibration | discussion]] under /* Optimization Format */. + * We introduce a new variable to produce coupled equations: $\widehat{I_c}\,$. This is meant to simplify the nonlinearities. + + minimize $\frac{|\widehat{v_{off}}|}{L_{off}}\,+\frac{|\widehat{e_{com}}\,-e_{com-center}|}{L_{com}}+\frac{|\widehat{e_{ref}}|}{L_{ref}}\,+\frac{| \widehat{e_b}\,|}{L_b}$ - w.r.t $\overline{v_{off}'}\,,\overline{e_{com}'}\,,\overline{e_{ref}'}\,,\overline{e_{b}'}\, + w.r.t. [itex]\widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,,\widehat{I_c} -$ + [/itex] - subject to $[\overline{v_{off}}\,,\overline{e_{com}}\,,\overline{e_{ref}}\,,\overline{e_{b}}]=[\mathcal{N}({\mu}_{off},{\sigma}^{2}_{off}),\mathcal{N}({\mu}_{com},{\sigma}^{2}_{com}) , \mathcal{N}({\mu}_{ref},{\sigma}^{2}_{ref}), \mathcal{N}({\mu}_{b},{\sigma}^{2}_{b})]\, + subject to [itex][|\widehat{v_{off}}|\,,\widehat{e_{com}}\,,-\widehat{e_{com}}\,,|\widehat{e_{ref}}|\,,|\widehat{e_b}|]\,\leq\,[L_{off}\,,L_{com}\,,0,L_{ref}\,,L_{b}] -$ + [/itex]
+ $\begin{array}{lcl} + \left[\begin{array}{c} + V_{ref}\\ + V_{c}\end{array}\right] & = & \left[\begin{array}{ccccc} + 1 & (R_{b}+R_{c}) & 1 & 1 & 0\\ + 0 & R_{c} & 0 & 1 & 1\end{array}\right]\left[\begin{array}{c} + \widehat{e_{ref}}\\ + \widehat{I_{c}}\\ + \widehat{I_{c}}\,\widehat{e_{b}}\\ + \widehat{I_{c}}\,\widehat{e_{com}}\\ + \widehat{v_{off}}\end{array}\right]\end{array} +$ + $\begin{array}{lcl} + |\widehat{e_{ref}}| & < & V_{ref}\\ + \widehat{I_{c}} & > & 0\\ + V_{c} & < & V_{ref}+\widehat{e_{ref}}\end{array} +$ - * '''Ignore This until repairs are done on first example''': Proposed: Change the w.r.t. to coefficients like so. This corresponds to the case where the run time processor is limited and linear corrections are to be used. This is unfinished since $V_c \,$ needs to be moved to a range; i.e. robust approximation. + ====Optimization Format 3==== - minimize $\left(1-\frac{\widehat{R_t}}{R_t}\right)^2\, + *Working directly on choosing the most likely value of [itex]\widehat{R_{t}}$. + + minimize r + + w.r.t $\widehat{R_{t}}\,$ + $\widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,$ + + + subject to + $V_c=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(R_c +\widehat{e_{com}})}{(R_c+\widehat{e_{com}} + R_b+\widehat{e_b})}$ [/itex] - w.r.t. $[\widehat{a_{off}},\widehat{a_{com}},\widehat{a_{ref}},\widehat{a_b}],[\widehat{b_{off}},\widehat{b_{com}},\widehat{b_{ref}},\widehat{b_b}] \,$ + $V_t=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(\widehat{R_t} +\widehat{e_{com}})}{(\widehat{R_t}+\widehat{e_{com}} + R_b+\widehat{e_b})} - subject to [itex][|\widehat{v_{off}}|\,,\widehat{e_{com}}\,,-\widehat{e_{com}}\,,|\widehat{e_{ref}}|\,,|\widehat{e_b}|]\leq [.001,.001,0,.0001V_{ref}\,,.001R_b]\,$ + - $[V_{ref},R_b]=[2,1] \, +$ [/itex] - $[V_c,R_c]=[.998,1] \, + [itex]\left(\frac{{\widehat{v_{off}}-\mu_{off}}}{\sigma_{off}}\right)^2+\left(\frac{{\widehat{e_{com}}-\mu_{com}}}{\sigma_{com}}\right)^2+\left(\frac{{\widehat{e_{ref}}-\mu_{ref}}}{\sigma_{ref}}\right)^2+\left(\frac{{\widehat{e_{b}}-\mu_{b}}}{\sigma_{b}}\right)^2 =r +$ + $\widehat{R_{t}} > 0$ + + ====Optimization Format 4==== + *An alternate selection criteria; probably not usable. + + minimize r + + w.r.t $\bold{E}(\widehat{R_{t}})\,$ + $\widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,$ + + + subject to + $V_c=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(R_c +\widehat{e_{com}})}{(R_c+\widehat{e_{com}} + R_b+\widehat{e_b})}$ [/itex] - $V_c=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(R_c +\widehat{e_{com}})}{(R_c+\widehat{e_{com}} + R_b+\widehat{e_b})}\, + [itex]V_t=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(\widehat{R_t} +\widehat{e_{com}})}{(\widehat{R_t}+\widehat{e_{com}} + R_b+\widehat{e_b})}$ [/itex] - $[\widehat{v_{off}},\widehat{e_{com}},\widehat{e_{ref}},\widehat{e_b}]=[\widehat{a_{off}},\widehat{a_{com}},\widehat{a_{ref}},\widehat{a_b}]+V_c[\widehat{b_{off}},\widehat{b_{com}},\widehat{b_{ref}},\widehat{b_b}] + [itex]\left(\frac{{\widehat{v_{off}}-\mu_{off}}}{\sigma_{off}}\right)^2+\left(\frac{{\widehat{e_{com}}-\mu_{com}}}{\sigma_{com}}\right)^2+\left(\frac{{\widehat{e_{ref}}-\mu_{ref}}}{\sigma_{ref}}\right)^2+\left(\frac{{\widehat{e_{b}}-\mu_{b}}}{\sigma_{b}}\right)^2 =r - \, +$ [/itex] + $\widehat{R_{t}} > 0$ ===Infrared Gas analysers=== ===Infrared Gas analysers===

## Motivation

In instrumentation, both in a supporting role and as a prime objective, measurements are taken that are subject to systematic errors. Routes to minimizing the effects of these errors are:

• Spend more money on the hardware. This is valid but hits areas of diminishing returns; the price rises disproportionately with respect to increased accuracy.
• Apparently, in the industrial processing industry, various measurement points are implemented and regressed to find "subspaces" that the process has to be operating on. Due to lack of experience I (RR) will not be covering that here; although others are welcome to (and replace this statement). This is apparently called "data reconciliation".
• Calibrations are done and incorporated into the instrument. This can be done by analog adjustments or written into storage mediums for subsequent use by operators or software.
• Runtime Auto-calibrations done at regular intervals. These are done at a variety of time intervals: every .01 seconds to 30 minutes. I can speak to these most directly; but I consider the "Calibrations" to be a special case.

## Mathematical Formulation

Nomenclature: It will be presumed, unless otherwise stated, that collected variables compose a (topological) manifold; i.e. a collection designated by single symbol and id. Not necessarily possessing a differential geometry metric. The means that there is no intrinsic two dimensional tensor, $LaTeX: g_{ij} \,$, allowing a identification of contravarient vectors with covarient ones. These terms are presented to provide a mathematically precise context to distinguish: contravarient and covariant vectors, tangent spaces and underlying coordinate spaces. Typically they can be ignored.

• The quintessential example of covariant tensor is the differential of a scaler, although the vector space formed by differentials is more extensive than differentials of scalars.
• The quintessental contravariant vector is the derivative of a path $LaTeX: p \,$ with component values $LaTeX: e^i =f_i(s) \,$ on the manifold. With $LaTeX: (p)^j=\frac{\partial e^j}{\partial s}\cdot \frac {\partial}{\partial e^j} \,$ being a component of the contravariant vector along $LaTeX: p \,$ parametrized by "s".
• Using $LaTeX: e \,$ (see directly below) as an example
• $LaTeX: e_{id} \,$ refers to collection of variables identified by "id"
• Although a collection does not have the properties of a vector space; in some cases we will assume (restrict) it have those properties. In particular this seems to be needed to state that the Q() functions are convex.
• $LaTeX: e_{id}^i \,$ refers to the $LaTeX: i'th \,$ component of $LaTeX: e_{id} \,$
• $LaTeX: (e_{id})_j^i\,$ refers to the tangent/cotangent bundle with $LaTeX: i \,$ selecting a contravariant component and $LaTeX: j \,$ selecting a covariant component
• $LaTeX: (expr)_{|x\leftarrow c} \,$ refers to an expression, "expr", where $LaTeX: (expr)$ is evaluated with $LaTeX: x=c$
• $LaTeX: (expr)_{|x\rightarrow c} \,$ refers to an expression, "expr", where $LaTeX: (expr)$ is evaluated as the limit of "x" as it approaches value "c"

Definitions:

• $LaTeX: x\,$ a collection of some environmental or control variables that need to be estimated
• $LaTeX: x_c\,$ a collection of calibration points
• $LaTeX: \bar{x}\,$ the PDF of $LaTeX: x\,$ . This is a representation of a function.
• $LaTeX: \bar{x}(x_c)\,$ the evaluation of the PDF $LaTeX: \bar{x}\,$ at $LaTeX: x_c$.
• $LaTeX: \hat{x}$ be the estimate of $LaTeX: x\,$
• $LaTeX: p \,$ a collection of parameters that are constant during operations but selected at design time. The system "real" values during operation are typically $LaTeX: p+e \,$; although other modifications are possible.
• $LaTeX: e\,$ be errors: assumed to vary, but constant during intervals between calibrations and real measurements
• $LaTeX: \bar{e}\,$ the PDF of $LaTeX: e\,$ . This is a representation of a function.
• $LaTeX: \bar{e}(x)\,$ the evaluation of the PDF $LaTeX: \bar{e}\,$ at x.
• $LaTeX: y\,$ be the results of a measurement processes attempting to measure $LaTeX: x\,$
• $LaTeX: y=Y(x;p,e)\,$ where $LaTeX: e\,$ might be additive, multiplicative, or some other form.
• $LaTeX: y_c=Y(x_c;p,e)\,$ the reading values at the calibration points for an instantiation of $LaTeX: e\,$
• $LaTeX: \hat{e}$ be estimates of $LaTeX: e\,$ derived from $LaTeX: x, y\,$
• $LaTeX: \hat{e}=Est(x_c,y_c)\,$
• $LaTeX: Q(x,\hat{x})$ be a quality measure of resulting estimation; for example $LaTeX: \sum{(x_i-\hat{x_i})^2}$
• Where $LaTeX: x\,$ is allowed to vary over a domain for fixed $LaTeX: \hat{x}$
• The example is oversimplified as will be demonstrated below.
• $LaTeX: \hat{x} \,$ is typically decomposed into a chain using $LaTeX: \hat{e}\,$

Then the problem can be formulated as:

• Given $LaTeX: x_c,y_c\,$
• Find a formula or process $LaTeX: \hat{X}\,$ to select $LaTeX: \hat{X}\left(x_c,y_c\right)\rightarrow\hat{x} \,$ so as to minimize $LaTeX: Q(x,\hat{x})$
• The reason for the process term $LaTeX: \hat{X} \,$ is that many correction schemes are feedback controlled; $LaTeX: \hat{X} \,$ is never computed, internally, although it might be necessary in design or analysis.

### Algebra of Distributions of Random Variables

This section discusses algebraic combinations of variables realized from distributions.

• $LaTeX: \mathcal{F}(g(x))\,$ is the Fourier transform of $LaTeX: g(x)$.
• $LaTeX: \mathcal{M}(g(x))\,$ is the Mellin transform of $LaTeX: g(x)$.
• $LaTeX: \oplus\,$:Let
• $LaTeX: c=a+b,\ a,b,c\in \mathbb{R}\,$,
• $LaTeX: \overline{c},\overline{a},\overline{b}\,$ the PDF's of $LaTeX: a,b,c \,$.
• $LaTeX: \overline{c} = \overline{a}\oplus \overline{b}=\mathcal{F}^{-1}( \mathcal{F}(\overline{a})\cdot \mathcal{F}\left(\overline{b} \right))\,$
• $LaTeX: \ominus \,$:Let
• $LaTeX: c=a-b=a+(-b),\ a,b,c\in \mathbb{R} \,$,
• $LaTeX: \overline{c},\overline{a},\overline{b}(-x)\,$ the PDF's of $LaTeX: a,-b,c\,$.
• $LaTeX: \overline{c} = \overline{a}\ominus \overline{b}=\mathcal{F}^{-1}( \mathcal{F}(\overline{a})\cdot \mathcal{F}\left(\overline{b}(-x) \right))\,$
• $LaTeX: \otimes \,$:Let
• $LaTeX: c=a\cdot b,\ a,b,c\in (0,\infty)\,$
• Springer as an extension to $LaTeX: \mathbb{R} \,$
• $LaTeX: \overline{c},\overline{a},\overline{b}\,$ the PDF's of $LaTeX: a,b,c\,$.
• $LaTeX: \overline{c} = \overline{a}\otimes \overline{b}=\mathcal{M}^{-1}( \mathcal{M}(\overline{a})\cdot \mathcal{M}\left( \overline{b} \right))\,$
• $LaTeX: \oslash$:Let
• $LaTeX: c= \frac{a}{b},\ a,b,c\in (0,\infty) \,$
• Springer as an extension to $LaTeX: \mathbb{R} \,$
• $LaTeX: \overline{c},\overline{a},\overline{b}(x)\,$ the PDF's of $LaTeX: a,b,c\,$.
• $LaTeX: \overline{c} = \overline{a}\oslash \overline{b}=\mathcal{M}^{-1}( \mathcal{M}(\overline{a})\cdot \mathcal{M}\left(\overline{b}(\frac{1}{x}) \right))\,$

Reference: The algebra of random variables, Springer, M.D., 1979, Wiley, New York

## Examples

### Biochemical temperature control

where multiple temperature sensors are multiplexed into a data stream and one or more channels are set aside for Auto-calibration. Expected final systems accuracies of .05 degC are needed because mammalian temperature regulation has resulting in processes and diseases that are "tuned" to particular temperatures.

• A simplified example, evaluating one calibration channel and one reading channel. In order to be more obvious the unknown and calibration readings are designated separately; instead of the convention given above. This is more obvious in a simple case, but in more complicated cases is unsystematic.
• $LaTeX: V_x=v_{off}+\frac{V_{ref}R_x}{R_x + R_b}$
• $LaTeX: R_x \,$ can be either the calibration resistor $LaTeX: R_c \,$ or the unknown resistance $LaTeX: R_t \,$ of the thermistor
• $LaTeX: V_x \,$ is the corresponding voltage read: $LaTeX: V_c\,$ or $LaTeX: V_t\,$
• $LaTeX: v_{off} \,$ is the reading offset value, an error
• $LaTeX: \overline{v_{off}}\,$ the PDF of $LaTeX: v_{off} \,$
• $LaTeX: V_{ref}, e_{ref} \,$ the nominal bias voltage and bias voltage error
• $LaTeX: \overline{e_{ref}}\,$ the PDF of $LaTeX: e_{ref} \,$
• $LaTeX: R_b, e_b \,$ the nominal bias resistor and bias resistor error
• $LaTeX: \overline{e_b}\,$ the PDF of $LaTeX: e_b\,$
• $LaTeX: e_{com} \,$ an unknown constant resistance in series with $LaTeX: R_c, R_t \,$ for all readings
• $LaTeX: \overline{e_{com}}\,$ the PDF of $LaTeX: e_{com} \,$
• $LaTeX: \overline{e_{com}'}\,$ the restricted form of $LaTeX: \overline{e_{com}}\,$
• Hereafter $LaTeX: x' \,$ will signify a restricted form of $LaTeX: x\,$
• With errors
• $LaTeX: V_x=v_{off}+\frac{(V_{ref} +e_{ref})(R_x +e_{com})}{(R_x+e_{com} + R_b+e_b)}$
• Implicit formula for PDF distributions. Generally this form two unknown distributions $LaTeX: \overline{V_{t}},\overline{R_{t}}\,$ but in any particular application one or the other is known. In addition the constants, $LaTeX: 1, V_{ref}, V_b \,$ in the formula stand for the Dirac delta distribution positioned on the constant.
• $LaTeX: \overline{V_{t}}\ominus\overline{v_{off}}\ominus\left(\left(V_{ref}\oplus\overline{e_{ref}}\right)\oslash\left(1\oplus\left(\left(R_{b}\oplus\overline{e_{b}}\right)\oslash\left(\overline{R_{t}}\oplus\overline{e_{com}}\right)\right)\right)\right)=0\,$
• $LaTeX: V_c=\left.V_x\right|_{x\leftarrow c}$
• $LaTeX: V_t=\left.V_x\right|_{x\leftarrow t}$
• The problem is to optimally estimate $LaTeX: R_t\,$ based upon $LaTeX: V_t \,$ and $LaTeX: V_c \,$
• The direct inversion formula illustrates the utility of mathematically using the error space $LaTeX: [V_{off}\,,e_{com}\,,e_b\,,e_{ref}] \,$ during design and analysis. The direct inversion of $LaTeX: V_t \,$ for $LaTeX: R_t \,$ naturally invokes the error space as a link to $LaTeX: V_c \,$.
• Inversion for $LaTeX: R_t \,$
• $LaTeX: R_t=\frac{(V_t-v_{off})(e_{com}+R_b+e_b)-e_{com}(V_{ref}+e_{ref})}{V_{ref}-v_{off}-V_t-e_{ref}}$
• Inversion in terms of estimates
• $LaTeX: \widehat{R_t}=\frac{(V_t-\widehat{v_{off}}) (\widehat{e_{com}}+R_b+\widehat{e_b})-\widehat{e_{com}}(V_{ref}+\widehat{e_{ref}})}{V_{ref}-\widehat{v_{off}}-V_{t}-\widehat{e_{ref}}}$
• Mode estimate: Find the maximum value of $LaTeX: \overline{R_{t}'} \,$. A necessary condition for differentiable functions is $LaTeX: \frac{d\overline{R_{t}'}_{|{p'}}}{dp'}=0 \,$ In polynomial cases this can theoretically be solved via Groebner basis; but even given the "exact" solutions, one is forced into sub-optimal/approximate estimates.
• Mean estimate: Find the expectation, that is $LaTeX: \widehat{R_t}=\int R'\cdot \overline{R_{t}'}_{|{R'}} dR'$
• Worst case: where points considered where the constraint meets some boundary; say +- .01%
• Any of the above extended to cover a range of $LaTeX: R_t \,$ as well as the range of errors.
• It should be mentioned that, in this case $LaTeX: (R_t - \widehat{R_t})$ is not a good (or natural) function. A better function for both results and calculations is $LaTeX: (1-\frac{\widehat{R_t}}{R_t})\,$. The form of errors to be a natural variation from problem to problem and should be accommodated in any organized procedure.
• Sensitivities are needed during design in order to determine which errors are tight and find out how much improvement can be had by spending more money on individual parts; and during analysis to determine the most likely cause of failures.

#### Optimization Format

• The setpoint case with a full optimzer available at runtime. The purpose is to choose error space values that minimize some likelihood function. The selected error values can then be reused to calculate $LaTeX: \widehat{R_t} \,$ for different values of $LaTeX: V_t \,$. It is presumed that we choose likelihoods such that surfaces of constant likelihood form a series of nested n-1 dimensional convex sets/shells around a center.
• Absolute value case choosing error values for subsequent calculations.
minimize   $LaTeX: \frac{|\widehat{v_{off}}|}{L_{off}}\,+\frac{|\widehat{e_{com}}\,-e_{com-center}|}{L_{com}}+\frac{|\widehat{e_{ref}}|}{L_{ref}}\,+\frac{| \widehat{e_b}\,|}{L_b}$

w.r.t.     $LaTeX: \widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,$

subject to $LaTeX: [|\widehat{v_{off}}|\,,\widehat{e_{com}}\,,-\widehat{e_{com}}\,,|\widehat{e_{ref}}|\,,|\widehat{e_b}|]\,\leq\,[L_{off},L_{com},0,L_{ref}\,,L_{b}]$
$LaTeX: V_c=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(R_c +\widehat{e_{com}})}{(R_c+\widehat{e_{com}} + R_b+\widehat{e_b})}$


#### Optimization Format 2

• Reformulation in extended matrix format. A derivation is in the discussion under /* Optimization Format */.
• We introduce a new variable to produce coupled equations: $LaTeX: \widehat{I_c}\,$. This is meant to simplify the nonlinearities.
minimize   $LaTeX: \frac{|\widehat{v_{off}}|}{L_{off}}\,+\frac{|\widehat{e_{com}}\,-e_{com-center}|}{L_{com}}+\frac{|\widehat{e_{ref}}|}{L_{ref}}\,+\frac{| \widehat{e_b}\,|}{L_b}$

w.r.t.     $LaTeX: \widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,,\widehat{I_c}$

subject to $LaTeX: [|\widehat{v_{off}}|\,,\widehat{e_{com}}\,,-\widehat{e_{com}}\,,|\widehat{e_{ref}}|\,,|\widehat{e_b}|]\,\leq\,[L_{off}\,,L_{com}\,,0,L_{ref}\,,L_{b}]$
$LaTeX: \begin{array}{lcl}  \left[\begin{array}{c} V_{ref}\\ V_{c}\end{array}\right] & = & \left[\begin{array}{ccccc} 1 & (R_{b}+R_{c}) & 1 & 1 & 0\\ 0 & R_{c} & 0 & 1 & 1\end{array}\right]\left[\begin{array}{c} \widehat{e_{ref}}\\ \widehat{I_{c}}\\ \widehat{I_{c}}\,\widehat{e_{b}}\\ \widehat{I_{c}}\,\widehat{e_{com}}\\ \widehat{v_{off}}\end{array}\right]\end{array}  $
$LaTeX: \begin{array}{lcl}  |\widehat{e_{ref}}| & < & V_{ref}\\ \widehat{I_{c}} & > & 0\\ V_{c} & < & V_{ref}+\widehat{e_{ref}}\end{array}  $


#### Optimization Format 3

• Working directly on choosing the most likely value of $LaTeX: \widehat{R_{t}}$.
minimize   r

w.r.t      $LaTeX: \widehat{R_{t}}\,$
$LaTeX: \widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,$

subject to
$LaTeX: V_c=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(R_c +\widehat{e_{com}})}{(R_c+\widehat{e_{com}} + R_b+\widehat{e_b})}$
$LaTeX: V_t=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(\widehat{R_t} +\widehat{e_{com}})}{(\widehat{R_t}+\widehat{e_{com}} + R_b+\widehat{e_b})}$
$LaTeX: \left(\frac{{\widehat{v_{off}}-\mu_{off}}}{\sigma_{off}}\right)^2+\left(\frac{{\widehat{e_{com}}-\mu_{com}}}{\sigma_{com}}\right)^2+\left(\frac{{\widehat{e_{ref}}-\mu_{ref}}}{\sigma_{ref}}\right)^2+\left(\frac{{\widehat{e_{b}}-\mu_{b}}}{\sigma_{b}}\right)^2 =r$
$LaTeX: \widehat{R_{t}} > 0$


#### Optimization Format 4

• An alternate selection criteria; probably not usable.
minimize   r

w.r.t      $LaTeX: \bold{E}(\widehat{R_{t}})\,$
$LaTeX: \widehat{v_{off}}\,,\widehat{e_{com}}\,,\widehat{e_{ref}}\,,\widehat{e_b}\,$

subject to
$LaTeX: V_c=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(R_c +\widehat{e_{com}})}{(R_c+\widehat{e_{com}} + R_b+\widehat{e_b})}$
$LaTeX: V_t=\widehat{v_{off}}+\frac{(V_{ref} +\widehat{e_{ref}})(\widehat{R_t} +\widehat{e_{com}})}{(\widehat{R_t}+\widehat{e_{com}} + R_b+\widehat{e_b})}$
$LaTeX: \left(\frac{{\widehat{v_{off}}-\mu_{off}}}{\sigma_{off}}\right)^2+\left(\frac{{\widehat{e_{com}}-\mu_{com}}}{\sigma_{com}}\right)^2+\left(\frac{{\widehat{e_{ref}}-\mu_{ref}}}{\sigma_{ref}}\right)^2+\left(\frac{{\widehat{e_{b}}-\mu_{b}}}{\sigma_{b}}\right)^2 =r$
$LaTeX: \widehat{R_{t}} > 0$


### Infrared Gas analysers

With either multiple stationary filters or a rotating filter wheel. In either case the components, sensors, and physical structures are subject to significant variation.

## Various forms of $LaTeX: Q()\,$

• Weighted least squares of $LaTeX: Q()\,$ over the range of $LaTeX: x\,$
• Minimize mode of $LaTeX: \hat{e}$ with respect to the range of $LaTeX: e\,$ and the measurements $LaTeX: \bar{y}=Y(\bar{x};p,e)$
• Minimize the mean of $LaTeX: \hat{e}$ with respect to the range of $LaTeX: e\,$ and the measurements $LaTeX: \bar{y}=Y(\bar{x};p,e)$
• Minimize the worst case of $LaTeX: Q()\,$ over the range of $LaTeX: x\,$
• Some weighting of the error interval with respect to $LaTeX: Q()\,$

## Areas of optimization

Design

Runtime

Calibration usage